SGI Techpubs Library

Linux  »  Man Pages
find in page



NAME
       snmpconfig - SGI SNMP Agent configuration utility

SYNOPSIS
       a4700_snmpconfig [options] <L2 Hostname or IP address>
       xe_snmpconfig [options]
       uv_snmpconfig [options]

DESCRIPTION
       snmpconfig  configures  SNMP  configurations files for the desired SNMP
       agent.  Depending on the selected agent, some  may  require  additional
       parameters as illustrated in the SYNOPSIS section.

IMPORTANT NOTES
       1      snmpconfig cannot configure 2 agents at the same time.

       2      snmpconfig will destroy any SNMP previous configurations when -f
              is used.  Please use -r to save a backup.

OPTIONS
       -h     This help message

       -f     Overwrite configuration files

       -c     Configure SNMP.

       -t     Test SNMP. Consists in, for the selected agent MIB:

               1.  snmptranslate

               2.  snmpwalk

               3.  snmptable for each Table found in the MIB

       -r     Restore SNMP configuration files when -c option is used.

AGENTS
       1. a4700
              Requires the IP address or the hostname of the L2 controller

       2. xe  Require no argument.

       3. uv  Require no argument.

COPYRIGHT
       Copyright © 2009-2011 Silicon Graphics Inc.

SEE ALSO
       snmpd(8),  snmptrapd(8),  snmptranslate(1),  snmpwalk(1),  snmptrap(1),
       snmp.conf(5), snmpd.conf(5), snmpcmd(1), snmptrapd.conf(5)

Agent Configuration              June 6, 2011                      SGI SNMP(8)

Output converted with man2html


home/search | what's new | help