SGI Techpubs Library

Linux  »  Man Pages
find in page

gimprc-1.2


DESCRIPTION

       The  gimprc file is a configuation file read by the gimp when it starts
       up.   There  are  two  of  these:  one  system-wide   one   stored   in
       /etc/gimp/1.2/gimprc  and  a  per-user $HOME/.gimp-1.2/gimprc which may
       override system settings.

       Comments are introduced by a hash sign (#), and continue until the  end
       of the line.  Blank lines are ignored.

       The  gimprc  file  associates values with properties.  These properties
       may be set by lisp-like assignments of the form:

              (property-name   value)

       where:

       property-name
                 is one of the property names described below.

       value     is the value the property is to be set to.

       Either spaces or tabs may be used to separate the name from the  value.

       The values have an associated type, described below:

       STRING A  sequence  of  characters  surrounded by double-quotes (").  A
              backslash (\) may be  used  to  escape  either  double-quote  or
              itself  to  generate  a  literal double-quote or a literal back-
              slash.

       PATH   Same as STRING, but path-expansion  (see  below)  is  also  per-
              formed.

       DOUBLE An optional minus sign (-) followed by zero or more decimal dig-
              its, and optionally a decimal-point (.) followed by zero or more
              decimal digits.

       FLOAT  Same as DOUBLE.

       INT    Same  as  DOUBLE, except the value is rounded to the next lowest
              integer.

       BOOLEAN
              One of true, on, yes, false, off,  or  no.   Alternatively,  the
              empty string is interpreted to mean true.

       POSITION
              Same as two INTs separated by whitespace.

       MEMSIZE
              An INT followed by a size specifier.  A size specifier is one of
              m, M, k, K, b, or B.  The size  specified  may  be  omitted,  in
              which case it defaults to k.

       IMAGETYPE

       UNIT   One of inches, millimeters, picas, or points or  the  identifier
              of  one  of  the  units  you  have  defined  in  your user units
              database.


PROPERTIES

       Valid properties and their types:

       temp-path PATH
              Set the temporary storage directory. Files will appear here dur-
              ing  the  course of running the gimp.  Most files will disappear
              when the gimp exits, but some files are likely to  remain,  such
              as working palette files, so it is best if this directory not be
              one that is shared by other  users  or  is  cleared  on  machine
              reboot such as /tmp.

       swap-path PATH
              Set  the  swap  file location. The gimp uses a tile based memory
              allocation scheme. The swap file is used to quickly  and  easily
              swap  tiles out to disk and back in. Be aware that the swap file
              can easily get very large if the gimp is used with large images.
              Also,  things  can get horribly slow if the swap file is created
              on a directory that is mounted over NFS.  For these reasons,  it
              may be desirable to put your swap file in "/tmp".

       brush-path PATH
              Set  the  brush  search  path. This is a colon-separated list of
              directories to be searched for brushes.

       pattern-path PATH
              Set the pattern search path.  This is a colon-separated list  of
              directories to be searched for patterns.

       plug-in-path PATH
              Set  the  plug-in search path. This is a colon-separated list of
              directories which will be scanned at  startup  to  register  new
              plugins.

       palette-path PATH
              Set  the palette search path.  This is a colon-separated list of
              directories to be searched for palettes.

       gradient-path PATH
              Set the gradient search path.  This is a colon-separated list of
              directories to be searched for gradients.

       module-path PATH
              Set  the  module  search path. This is a colon-separated list of
              directories which will be scanned at startup for modules  to  be
              loaded.

       default-brush STRING
              Specify  a default brush.  This doesn’t actually do anything any
              more, since the default brush is set as part of the saved device
              status.
              Specify  a default gradient. The gradient is searched for in the
              specified gradient path.

       gamma-correction DOUBLE
              Set the gamma correction value for the display.  1.0 corresponds
              to  no  gamma  correction.   For most displays, gamma correction
              should be set to between 2.0 and 2.6 Run the utility "gamma_cor-
              rect"  to determine appropriate values for your display.  XXX is
              this valid info?  One important  item  to  keep  in  mind:  Many
              images that you might get from outside sources will in all like-
              lihood already be gamma-corrected.  In these  cases,  the  image
              will look washed-out if the gimp has gamma-correction turned on.
              If you are going to work with images of this  sort,  turn  gamma
              correction off by setting the value to 1.0.

       color-cube COLORCUBE
              Set the displays color cube.  No longer used in gimp-1.2.x since
              the introduction of GdkRgb.

       install-colormap BOOLEAN
              Install a private colormap by default - not actually  used  any-
              more since the introduction of GdkRgb.

       tile-cache-size MEMSIZE
              The  tile  cache  is  used  to make sure the gimp doesn’t thrash
              tiles between memory and disk. Setting this  value  higher  will
              cause  the  gimp to use less swap space, but will also cause the
              gimp to use more memory. Conversely, a smaller cache size causes
              the gimp to use more swap space and less memory.  Note: the gimp
              will still run even if ‘tile-cache-size’ is set to 0. The actual
              size  can  contain a suffix of ’m’, ’M’, size as being specified
              in megabytes, kilobytes and bytes respectively. If no suffix  is
              specified the size defaults to being specified in kilobytes.

       marching-ants-speed INT
              Speed  of marching ants in the selection outline.  This value is
              in milliseconds (less time indicates faster marching).

       last-opened-size INT
              How many recently opened image filenames to  keep  on  the  File
              menu.

       undo-levels INT
              Set the number of operations kept on the undo stack.

       transparency-type INT
              Set  the  manner  in  which transparency is displayed in images.
              Transparency type can be one of 0 - Light Checks, 1  -  Mid-Tone
              Checks,  2  - Dark Checks, 3 - White Only, 4 - Gray Only, or 5 -
              Black Only.

       transparency-size INT
              Check size can be one of 0 - Small, 1 - Medium, or 2 - Large

       perfect-mouse BOOLEAN
              If set to true, the X server is queried for the mouse’s  current

       default-threshold INT
              Tools such as fuzzy-select and bucket fill find regions based on
              a seed-fill algorithm.  The seed fill  starts  at  the  intially
              selected  pixel  and progresses in all directions until the dif-
              ference of pixel intensity from the original is greater  than  a
              specified  threshold.  This value represents the default thresh-
              old.

       stingy-memory-use BOOLEAN
              There is always a tradeoff between memory usage and  speed.   In
              most  cases,  the  GIMP opts for speed over memory.  However, if
              memory is a big issue, set stingy-memory-use.

       allow-resize-windows BOOLEAN
              When zooming into and out of images,  this  option  enables  the
              automatic resizing of windows.

       dont-allow-resize-windows BOOLEAN
              Negated version of allow-resize-windows.

       cursor-updating BOOLEAN
              Context-dependent   cursors  are  cool.   They  are  enabled  by
              default.  However, they require overhead that you may want to do
              without.

       no-cursor-updating BOOLEAN
              Negated version of cursor-updating.

       preview-size PREVIEWSIZE
              Set the layer preview size.

       show-rulers BOOLEAN
              Set  the ruler visibility. The default behavior is for rulers to
              be on.  This can also be toggled with  the  View->Toggle  Rulers
              command or shift+control+r.

       dont-show-rulers BOOLEAN
              Negated version of show-rulers.

       show-statusbar BOOLEAN
              Controlling  statusbar  visibility.  The  default behavior is to
              show  the  statusbar.   This  can  also  be  toggled  with   the
              View->Toggle Statusbar command or shift+control+s.

       dont-show-statusbar BOOLEAN
              Negated version of show-statusbar.

       auto-save BOOLEAN
              Auto  saving is not yet implemented! Nothing will be auto-saved,
              no matter how you set this.

       dont-auto-save BOOLEAN
              Negated version of auto-save.

       cubic-interpolation BOOLEAN
              Negated version of confirm-on-close.

       save-session-info BOOLEAN
              Remember the positions and sizes of the main  dialogs  and  asks
              your  window-manager to place them there again the next time you
              use the GIMP.

       dont-save-session-info BOOLEAN
              Negated version of save-session-info.

       save-device-status BOOLEAN
              Remember the current tool, pattern, color, and brush across GIMP
              sessions.

       dont-save-device-status BOOLEAN
              Negated version of save-device-status.

       always-restore-session BOOLEAN
              Let GIMP try to restore your last saved session.

       show-tips BOOLEAN
              Set to display a handy GIMP tip on startup.

       dont-show-tips BOOLEAN
              Negated version of show-tips.

       show-tool-tips BOOLEAN
              Set to display tooltips in the toolbox.

       dont-show-tool-tips BOOLEAN
              Negated version of show-tool-tips.

       default-image-size POSITION
              Set the default image size in the File/New dialog.

       default-image-type IMAGETYPE
              Set the default image type in the File/New dialog.

       default-units UNIT
              Set  the  default units for new images and for the File/New dia-
              log.  This units will be used for coordinate display when not in
              dot-for-dot  mode. The default units can be one of inches , mil-
              limeters, points or picas or the identifier of one of the  units
              defined in your user units database. The default is inches.

       default-xresolution FLOAT
              Set the default horizontal resolution for new images and for the
              File/New dialog. This value is always in dpi (dots per inch).

       default-yresolution FLOAT
              Set the default vertical resolution for new images and  for  the
              File/New dialog. This value is always in dpi (dots per inch).

       default-resolution-units UNIT
              Set  the  units for the display of the default resolution in the
              File/New dialog. The default resolution  units  can  be  one  of
              Set the monitor’s vertical resolution, in dots per inch.  If set
              to 0, forces the X server to be queried for both horizontal  and
              vertical resolution information.

       num-processors INT
              On  multiprocessor  machines,  if  GIMP  has  been compiled with
              --enable-mp this sets how many processors GIMP should use simul-
              taneously.

       image-title-format STRING
              Set  the text to appear in image window titles.  Certain % char-
              acter sequences are recognised and expanded as follows:

              %%  literal percent sign
              %f  bare filename, or "Untitled"
              %F  full path to file, or "Untitled"
              %p  PDB image id
              %i  view instance number
              %t  image type (RGB, indexed, greyscale)
              %z  zoom factor as a percentage
              %s  source scale factor
              %d  destination scale factor
              %Dx expands to x if the image is dirty, the empty string  other-
              wise.  The x can be any character, eg %D*.

              The default format string is "%f-%p.%i (%t)".


PATH EXPANSION

       Strings  of  type  PATH  are  expanded  in a manner similar to bash(1).
       Specifically: tilde (~) is expanded to the user’s home  directory,  and
       ${variable}  is  expanded  to  the current value of the variable.  Note
       that the bash feature of being able  to  refer  to  other  user’s  home
       directories by writing ~userid/ is not valid in this file.

       The  only  variable  initially  defined  is  gimp_dir , which is set to
       either  the  interned  value  .gimp-1.2  or  the  environment  variable
       GIMP_DIRECTORY.   If the path in GIMP_DIRECTORY is relative, it is con-
       sidered relative to your home directory.  The same  variable  expansion
       syntax  can  be  used to refer to environment variables.  New variables
       may be defined so long as their name does not shadow one of  the  prop-
       erty  names given in the previous section.  Variables are set using the
       following syntax:

              (variable-name   PATH)

       Note that the right  hand  side  of  this  assignment  is  itself  path
       expanded before setting the value of the variable.

       Typically, the system-wide gimprc file will set a few convenience vari-
       ables:

       prefix The installation prefix for this build, /usr.

       exec_prefix


FILES

       /etc/gimp/1.2/gimprc
              System-wide configuration file

       $HOME/.gimp-1.2/gimprc
              Per-user configuration file


SEE ALSO

       gimp(1), gimptool(1), gimp-remote(1)

Version 1.2.3                     14 Oct 2000                        GIMPRC(5)

Output converted with man2html


home/search | what's new | help