|
|
Hardware » Books » End-User »
Indy Workstation Owner's Guide
(document number: 007-9804-060 / published: 1996-07-25)
table of contents | additional info | download
find in page
Appendix A. Cable Pinout AssignmentsThis appendix contains cable pinout information for the following ports located on the back of the Indy workstation:
serial
parallel
Ethernet 10-BASE T
ISDN (Integrated Services Digital Network)
Ethernet AUI (Access Unit Interface)
keyboard
mouse
SCSI port (Small Computer System Interface)
audio
video
graphics
stereo view
Table A-1 and Table A-2 shows cable pinout assignments for the serial ports.
Table A-1. 4D Compatible Pin Assignments (RS-232)
Pin
| Assignment
| Description
|
|---|
1
| DTR
| Data Terminal Ready
| 2
| CTS
| Clear To Send
| 3
| TD
| Transmit Data
| 4
| SG
| Signal Ground
| 5
| RD
| Receive Data
| 6
| RTS
| Request To Send
| 7
| DCD
| Data Carrier Detect
| 8
| SG
| Signal Ground
|
Table A-2. Macintosh® Plus, SE, and II Compatible Pin Assignments (RS-422)
Pin
| Assignment
| Description
|
|---|
1
| HSKo
| Output Handshake
| 2
| HSKi
| Input Handshake or External Clock
| 3
| TxD–
| Transmit Data –
| 4
| GND
| Signal Ground
| 5
| RxD–
| Receive Data –
| 6
| TxD+
| Transmit Data +
| 7
| GPi
| General Purpose Input
| 8
| RxD+
| Receive Data +
|
Table A-3 shows the cable pinout assignments for the parallel port.
Table A-3. Parallel Port (25-pin DSUB Connector) Pin Assignments
Pin
| Assignment
|
|---|
1
| STROBE
| 2
| DATA(0)
| 3
| DATA(1)
| 4
| DATA(2)
| 5
| DATA(3)
| 6
| DATA(4)
| 7
| DATA(5)
| 8
| DATA(6)
| 9
| DATA(7)
| 10
| ACK
| 11
| BUSY
| 12
| PE (Paper End)
| 13
| SELECT
| 14
| AUTOFEED
| 15
| ERROR/FAULT
| 16
| INIT/RESET
| 17
| SELECT-IN (Direction)
| 18
| GROUND
| 19
| GROUND
| 20
| GROUND
| 21
| GROUND
| 22
| GROUND
| 23
| GROUND
| 24
| GROUND
| 25
| GROUND
|
Table A-4 shows the cable pinout assignments for the Ethernet 10-BASE T port.
Table A-4. Ethernet 10-BASE T Port Pin Assignments
Pin
| Assignment
|
|---|
1
| TRANSMIT+
| 2
| TRANSMIT–
| 3
| RECEIVE+
| 4
| (Reserved)
| 5
| (Reserved)
| 6
| RECEIVE–
| 7
| (Reserved)
| 8
| (Reserved)
|
Table A-5 shows the cable pinout assignments for the ISDN port.
Table A-5. ISDN Port Pin Assignments
Pin
| Assignment
|
|---|
1
| (Reserved)
| 2
| (Reserved)
| 3
| TRANSMIT+
| 4
| RECEIVE+
| 5
| RECEIVE-
| 6
| TRANSMIT-
| 7
| (Reserved)
| 8
| (Reserved)
|
Table A-6 shows the cable pinout assignments for the Ethernet AUI port.
Table A-6. Ethernet AUI Port (Thicknet) Pin Assignments
Pin
| Assignment
|
|---|
1
| GROUND
| 2
| COLLISION+
| 3
| TRANSMIT+
| 4
| GROUND
| 5
| RECEIVE+
| 6
| GROUND
| 7
| (Reserved)
| 8
| GROUND
| 9
| COLLISION-
| 10
| TRANSMIT-
| 11
| GROUND
| 12
| RECEIVE-
| 13
| +12V
| 14
| GROUND
| 15
| (Reserved)
|
Table A-7 shows the cable pinout assignments for the keyboard port.
Table A-7. Keyboard Port (6-pin MINIDIN) Pin Assignments
Pin
| Assignment
|
|---|
1
| KEYBOARD DATA
| 2
| (Reserved)
| 3
| GROUND
| 4
| KEYBOARD POWER (+5V)
| 5
| KEYBOARD CLOCK
| 6
| (Reserved)
|
Table A-8 shows the cable pinout assignments for the mouse port.
Table A-8. Mouse Port (6-Pin MINIDIN) Pin Assignments
Pin
| Assignment
|
|---|
1
| MOUSE DATA
| 2
| (Reserved)
| 3
| GROUND
| 4
| MOUSE POWER (+5V)
| 5
| MOUSE CLOCK
| 6
| (Reserved)
|
Table A-9 shows the cable pinout assignments for the SCSI port.
Table A-9. SCSI Port Pin Assignments
Pin
| Assignment
|
|---|
1
| GROUND
| 2
| GROUND
| 3
| GROUND
| 4
| GROUND
| 5
| GROUND
| 6
| GROUND
| 7
| GROUND
| 8
| GROUND
| 9
| GROUND
| 10
| GROUND
| 11
| GROUND
| 12
| (Reserved)
| 13
| Open
| 14
| (Reserved)
| 15
| GROUND
| 16
| GROUND
| 17
| GROUND
| 18
| GROUND
| 19
| GROUND
| 20
| GROUND
| 21
| GROUND
| 22
| GROUND
| 23
| GROUND
| 24
| GROUND
| 25
| GROUND
| 26
| DB(0)
| 27
| DB(1)
| 28
| DB(2)
| 29
| DB(3)
| 30
| DB(4)
| 31
| DB(5)
| 32
| DB(6)
| 33
| DB(7)
| 34
| DB(P)
| 35
| GROUND
| 36
| GROUND
| 37
| (Reserved)
| 38
| TERMPWR
| 39
| (Reserved)
| 40
| GROUND
| 41
| ATN
| 42
| GROUND
| 43
| BSY
| 44
| ACK
| 45
| RST
| 46
| MSG
| 47
| SEL
| 48
| C/D
| 49
| REQ
| 50
| I/O
|
Table A-10 shows the cable pinout assignments for the audio ports.
Table A-10. Audio Ports Pin Assignments
Connector
| Tip
| Ring
| Sleeve
|
|---|
Digital Input/Output
| Out
| In
| GROUND
| Headphone Output/Line Output 2
| L
| R
| GROUND
| Line Output 1
| L
| R
| GROUND
| Line Input 1
| L
| R
| GROUND
| Microphone Input/Line Input 2
| L
| R
| GROUND
|
Analog Composite Video (RCA) PortTable A-11 shows the cable pinout assignments for the analog composite video (RCA) port
Table A-11. Analog Composite Video (RCA) Port Pin Assignments
Pin
| Assignment
|
|---|
2 (sleeve)
| GROUND
| 3 (tip)
| COMPOSITE VIDEO (NTSC OR PAL)
|
Table A-12 shows the cable pinout assignments for the analog s-video port.
Table A-12. Analog S-Video Port Pin Assignments
Pin
| Assignment
|
|---|
1
| GROUND
| 2
| GROUND
| 3
| LUMINANCE (BRIGHTNESS)
| 4
| CHROMINANCE (COLOR)
|
Table A-13 shows the cable pinout assignments for the digital video port for the Silicon Graphics IndyCam digital video camera.
Table A-13. Digital Video Port for the IndyCam Camera
Pin
| Assignment
|
|---|
1
| (Reserved)
| 2
| (Reserved)
| 3
| (Reserved)
| 4
| (Reserved)
| 5
| (Reserved)
| 6
| (Reserved)
| 7
| SERIAL CONTROL DATA
| 8
| (Reserved)
| 9
| SERIAL CONTROL CLOCK
| 10
| (Reserved)
| 11
| (Reserved)
| 12
| CLOCK GROUND
| 13
| CLOCK
| 14
| (Reserved)
| 15
| (Reserved)
| 16
| (Reserved)
| 17
| (Reserved)
| 18
| (Reserved)
| 19
| (Reserved)
| 20
| (Reserved)
| 21
| (Reserved)
| 22
| +12
| 23
| +5
| 24
| -12
| 25
| (Reserved)
| 26
| (Reserved)
| 27
| DATA(7) GROUND
| 28
| DATA(7)
| 29
| DATA(6) GROUND
| 30
| DATA(6)
| 31
| DATA(3)
| 32
| DATA(3) GROUND
| 33
| DATA(4)
| 34
| DATA(4) GROUND
| 35
| DATA(5)
| 36
| DATA(5) GROUND
| 37
| (Reserved)
| 38
| (Reserved)
| 39
| (Reserved)
| 40
| (Reserved)
| 41
| (Reserved)
| 42
| (Reserved)
| 43
| (Reserved)
| 44
| (Reserved)
| 45
| (Reserved)
| 46
| DATA(0)
| 47
| DATA(0) GROUND
| 48
| DATA(1)
| 49
| DATA(1) GROUND
| 50
| DATA(2)
| 51
| DATA(2) GROUND
| 52
| (Reserved)
| 53
| (Reserved)
| 54
| (Reserved)
| 55
| (Reserved)
| 56
| (Reserved)
| 57
| (Reserved)
| 58
| (Reserved)
| 59
| (Reserved)
| 60
| (Reserved)
|
Table A-14 shows the cable pinout assignments for the Indy graphics port and Indy XZ graphics port.
Table A-14. Graphics Port Pin Assignments
Pin
| Assignment
|
|---|
1
| MONITOR TYPE (3) (active low)(For Indy XZ, pin 1 is RESERVED)
| 2
| MONITOR TYPE (0) (active low)
| 3
| RESERVED
| 4
| RESERVED
| 5
| RESERVED
| 6
| MONITOR TYPE (1) (active low)
| 7
| MONITOR TYPE (2) (active low)
| 8
| GROUND
| 9
| GROUND
| 10
| GROUND
|
Table A-15 shows the cable pinout assignments for the stereo view port.
Table A-15. Stereo View Port Pin Assignments
Pin
| Assignment
|
|---|
1
| STEREO POWER (+12V, 0.5A)
| 2
| STEREO GROUND
| 3
| VERTICAL - ODD FIELD
|
Indy Workstation Owner's Guide
(document number: 007-9804-060 / published: 1996-07-25)
table of contents | additional info | download
Front Matter
Chapter 1. Introduction
Chapter 2. Getting Started
Chapter 3. Installing Memory
Chapter 4. Installing GIO Option Boards
Chapter 5. Installing Peripherals: Internal and External Devices
Chapter 6. Installing and Removing Software
Chapter 7. Troubleshooting
Chapter 8. Ordering, Removing, and Installing Replacement Parts
Chapter 9. Safety, Maintenance, and Regulatory Information
Appendix A. Cable Pinout Assignments
Appendix B. Serial Cables
Appendix C. Floptical Drive Jumper Settings
Appendix D. International Keyboard Support
Glossary
Index
home/search |
what's new |
help
|
|
|
