SGI Techpubs Library

Hardware  »  Books  »  Administrative  »  
Silicon Graphics Onyx2 Rackmount Workstation Owner's Guide
(document number: 007-3457-005 / published: 1999-12-11)    table of contents  |  additional info  |  download
find in page

Silicon Graphics® Onyx2 Rackmount Owner's Guide

Document Number: 007-3457-005

CONTRIBUTORS

Written by Mark Schwenden and Bruce Miles

Illustrated by Dan Young and Cheri Brown

Production by Glen Traefald

Engineering contributions by Bob Patel, Reuel Nash, Dan Farmer, Bob Murphy, Sam Sengupta, Mike Mackovitch, Mohsen Hosseini, Jeff Milo, Patrick Conway, Kirk Law, Suzanne Jones, Dan Goldfarb, and Bob Marinelli.

© 1997–2000, Silicon Graphics, Inc.— All Rights Reserved

The contents of this document may not be copied or duplicated in any form, in whole or in part, without the prior written permission of Silicon Graphics, Inc.

LIMITED AND RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in the Rights in Data clause at FAR 52.227-14 and/or in similar or successor clauses in the FAR, or in the DOD, DOE or NASA FAR Supplements. Unpublished rights reserved under the Copyright Laws of the United States. Contractor/manufacturer is Silicon Graphics, Inc., 1600 Amphitheatre Pkwy., Mountain View, CA 94043-1351.

Shielded Cables

This product requires the use of external shielded cables in order to maintain compliance with Part 15 of the FCC rules.

FCC Warning

This equipment has been tested and found compliant with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. This product requires the use of external shielded cables in order to maintain compliance. Changes or modification to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

You may find the following booklet, prepared by the Federal Communications Commission, helpful: Interference Handbook 1993 Edition. This booklet is available from the U.S. Government Printing Office, Superintendent of Documents, Mail Stop: SSOP, Washington D.C. 20402-9328, ISBN 0-16-041736-8.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Attention

Le présent appareil numérique n'émet pas de perturbations radioélectriques dépassant les normes applicables aux appareils numériques de Classe A prescrites dans le Règlement sur les interferences radioélectriques établi par le Ministère des Communications du Canada.

Manufacturer's Regulatory Declarations

This workstation conforms to several national and international specifications and European directives as listed on the “Manufacturer's Declaration of Conformity,” which is included with each computer system and peripheral. The CE insignia displayed on each device is an indication of conformity to the European requirements.

Your workstation has several governmental and third-party approvals, licenses, and permits. Do not modify this product in any way that is not expressly approved by Silicon Graphics, Inc. If you do, you may lose these approvals and your governmental agency authority to operate this device.

Canadian and European Compliance Insignia

VCCI Class A Statement for Japan

Chinese Compliance Statement

Silicon Graphics, IRIX, IRIS, and Onyx are registered trademarks of Silicon Graphics, Inc. and InfiniteReality2, Origin, Onyx2, Onyx2 Reality, RealityMonster, SGI, the Silicon Graphics logo, and S2MP are trademarks of Silicon Graphics, Inc. CrayLink is a trademark of Cray Research, L.L.C. ADAT is a registered trademark of Alesis Corporation. EXABYTE is a trademark of EXABYTE Corporation. StereoView is a trademark of StereoGraphic Corporation. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd.

Silicon Graphics Onyx2 Rackmount Workstation Owner's Guide
(document number: 007-3457-005 / published: 1999-12-11)    table of contents  |  additional info  |  download

    Front Matter
    About This Guide
    Chapter 1. Introducing the Onyx2 Rackmount System
    Chapter 2. Chassis Tour
    Chapter 3. System Configurations, Connections, and Cabling
    Chapter 4. Getting Started
    Chapter 5. Installing and Replacing Customer-Replaceable Units
    Chapter 6. Using the System Controllers
    Chapter 7. Basic Troubleshooting
    Appendix A. System Specifications
    Appendix B. Drive Maintenance
    Appendix C. Module System Controller Messages
    Appendix D. Video Format Combiner Tutorial
    Index


home/search | what's new | help