Hardware  »  Books  »  End-User  »  
Indy Workstation Owner's Guide
(document number: 007-9804-060 / published: 1996-07-25)    table of contents  |  additional info  |  download
find in page

List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Sources of Information for the Indy Workstation

Figure 1-2. Indy Workstation Owner's Guide

Figure 1-3. IRIS InSight Icon

Figure 1-4. System Tour Icon

Figure 2-1. Indy Parts

Figure 2-2. Connecting an Ethernet AUI Cable to the Indy Workstation

Figure 2-3. Ethernet AUI Cable

Figure 2-4. Connecting an Ethernet 10-BASE T Cable to the Indy Workstation

Figure 2-5. Connecting an ISDN Cable to the Indy Workstation

Figure 2-6. The Indy Workstation Control Buttons on the Front Panel

Figure 2-7. Turning on the Indy Workstation

Figure 2-8. Running the Power-on Diagnostics Notifier

Figure 2-9. System Startup Notifier

Figure 2-10. System is Coming Up Notifier

Figure 2-11. The Login Screen

Figure 2-12. The EZsetup Screen

Figure 2-13. System Tour Icon

Figure 2-14. Desktop Icons

Figure 2-15. CD Player Icon

Figure 2-16. The Minimized Console Window

Figure 2-17. The Toolchests

Figure 2-18. IRIS InSight Icon

Figure 2-19. Connecting the IndyCam Camera Cable to the Workstation

Figure 2-20. Sliding the IndyCam Lens Cover Aside

Figure 2-21. Camera Icon

Figure 2-22. Turning Off the Indy Workstation

Figure 2-23. System Power Off Notifier

Figure 2-24. The Toolchests

Figure 2-25. System Shutdown Caution Message

Figure 2-26. System Shutdown Notifier

Figure 2-27. Okay to Power Off Notifier

Figure 2-28. Removing the Top Cover From the Indy Workstation

Figure 2-29. Replacing the Top Cover on the Indy Workstation

Figure 2-30. Attaching a Lock to the Indy Workstation

Figure 3-1. Locating the SIMM Sockets

Figure 3-2. SIMM Bank and Socket Numbers

Figure 3-3. Orienting the SIMM

Figure 3-4. Tilting Up the SIMM to a Vertical Position

Figure 3-5. The GIO Board Installed on the Right Side of the Graphics Board

Figure 3-6. System Startup Notifier

Figure 4-1. Locating the GIO Board Connectors on the Graphics Board

Figure 4-2. Removing the Screw from the GIO I/O Port Face Plate

Figure 4-3. Positioning a Single-Width Board

Figure 4-4. Positioning a Double-Width Board

Figure 4-5. Installing a Single-Width GIO Option Board

Figure 4-6. Installing a Double-Width GIO Option Board

Figure 4-7. Attaching the External Screws For a Single-Width Board

Figure 4-8. Attaching the External Screws For a Double-Width Board

Figure 5-1. Locating the Drive Bracket Above the System Drive

Figure 5-2. Removing the Drive Bracket

Figure 5-3. Connecting the SCSI Ribbon Cable and Power Cable to the Floptical or Second Hard Drive

Figure 5-4. Installing the Floptical Drive Above the System Drive

Figure 5-5. Removing the SCSI Terminator From the Indy Workstation

Figure 5-6. Connecting an External SCSI Device to the Indy Workstation

Figure 5-7. Daisy-Chaining an External SCSI Device to Another SCSI Device

Figure 5-8. Connecting a Terminator to the Last SCSI Device on the Daisy-Chain

Figure 5-9. Connecting the Power Cable to an External Device

Figure 5-10. CD-ROM Icon

Figure 5-11. Serial Ports on the Rear of the Indy Workstation

Figure 5-12. Connecting the Serial Cable to the Serial Port

Figure 5-13. Connecting an Audio Device to the Indy Workstation

Figure 5-14. Connecting a Video Device to the Indy Workstation

Figure 7-1. System Shutdown Notifier

Figure 7-2. Running the Power-on Diagnostics Notifier

Figure 7-3. System Startup Notifier

Figure 7-4. Confidence Tests Form

Figure 7-5. Audio Confidence Test Form

Figure 7-6. Keyboard Test

Figure 7-7. Pressing the Reset Button

Figure 7-8. System Startup Notifier

Figure 7-9. System Recovery Menu

Figure 7-10. Media Request Notifier

Figure 7-11. Enter Password Prompt

Figure 7-12. Locating the Password Jumper

Figure 7-13. Disabled Password Notifier

Figure 7-14. Finding Your Workstation's Serial Number

Figure 8-1. Part Number Locations

Figure 8-2. Locating the GIO Option Board

Figure 8-3. Removing the External Screws From a Single-Width Board

Figure 8-4. Removing the External Screws From a Double-Width Board

Figure 8-5. Removing the Screws From a Single-Width GIO Option Board

Figure 8-6. Removing the Screws From a Double-Width GIO Option Board

Figure 8-7. Locating the Graphics Board with GIO Option Board Installed

Figure 8-8. Removing the Screws From the Graphics Board's I/O Connector

Figure 8-9. Removing the Screws From the Graphics Board

Figure 8-10. Disconnecting the Graphics Board From the System Board

Figure 8-11. Connecting the Graphics Board to the System Board

Figure 8-12. Inserting the Screws on the Graphics Board

Figure 8-13. Replacing the Screws on the Graphics Board's I/O Connector

Figure 8-14. Removing the Screws From the X Board

Figure 8-15. Removing the Exterior Screws for the X Board

Figure 8-16. Disconnecting the X Board from the Z Board

Figure 8-17. Removing the Standoff Screws From the Z Board

Figure 8-18. Removing the Exterior Screws For the Z Board

Figure 8-19. Disconnecting the Z Board From the System Board

Figure 8-20. Locating the CPU Module

Figure 8-21. Removing the Two Screws From the CPU Module

Figure 8-22. Disconnecting the CPU Module

Figure 8-23. Installing the CPU Module

Figure 8-24. Locating the Memory SIMMs

Figure 8-25. Releasing the Latches on the SIMM

Figure 8-26. The GIO board Installed on the Right Side of the Graphics Board

Figure 8-27. Locating the Floptical or Second Hard Disk Drive

Figure 8-28. Removing the Floptical Drive

Figure 8-29. Disconnecting the Power and SCSI Cables From the Floptical Drive

Figure 8-30. Locating the Floptical Drive Installed in the Top Slot

Figure 8-31. Removing the Floptical Drive and Bracket

Figure 8-32. Disconnecting the Cables From the Floptical Disk Drive

Figure 8-33. Removing the System Disk Drive

Figure 8-34. Disconnecting the Power and SCSI Cables From the System Disk Drive

Figure 8-35. Installing the Replacement System Disk Drive

Figure 8-36. Re-installing the Floptical Drive

Figure 8-37. Locating the Power Supply

Figure 8-38. Removing the Power Supply

Figure 8-39. Installing the Power Supply

Figure 9-1. Basic Parameters of Visual Display Terminal Workstation Adjustment (Adapted From ANSI/HFS 100-1988)

Figure 9-2. VCCI Class 2 Statement for Japan

Figure A-1. Serial Port Pinout Assignment

Figure A-2. Serial Port Pinout Assignments

Figure A-3. Parallel Port Pinout Assignments

Figure A-4. Ethernet 10-BASE T Port Pinout Assignments

Figure A-5. ISDN Port Pinout Assignments

Figure A-6. Ethernet AUI Port Pinout Assignments

Figure A-7. Keyboard Port Pinout Assignments

Figure A-8. Mouse Port Pinout Assignments

Figure A-9. SCSI Port Pinout Assignments

Figure A-10. Analog Composite Video (RCA) Port Pinout Assignments

Figure A-11. Analog S-Video Port Pinout Assignments

Figure A-12. Digital Video Port Pinout Assignments

Figure A-13. Graphics Port Pinout Assignments

Figure A-14. Stereo View Port Pinout Assignments

Figure C-1. Floptical Drive Jumpers Set to SCSI Address 2

Figure D-1. Turning on the Power on the Indy Workstation

Figure D-2. System Startup Notifier

Figure D-3. Keyboard Layout Form

Indy Workstation Owner's Guide
(document number: 007-9804-060 / published: 1996-07-25)    table of contents  |  additional info  |  download

    Front Matter
    Chapter 1. Introduction
    Chapter 2. Getting Started
    Chapter 3. Installing Memory
    Chapter 4. Installing GIO Option Boards
    Chapter 5. Installing Peripherals: Internal and External Devices
    Chapter 6. Installing and Removing Software
    Chapter 7. Troubleshooting
    Chapter 8. Ordering, Removing, and Installing Replacement Parts
    Chapter 9. Safety, Maintenance, and Regulatory Information
    Appendix A. Cable Pinout Assignments
    Appendix B. Serial Cables
    Appendix C. Floptical Drive Jumper Settings
    Appendix D. International Keyboard Support
    Glossary
    Index