Hardware  »  Books  »  End-User  »  
Indigo2 Workstation Owner's Guide
(document number: 007-9096-050 / published: 1996-07-25)    table of contents  |  additional info  |  download
find in page

List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Sources of Information for the Indigo2 Workstation

Figure 1-2. Workstation Owner's Guide

Figure 1-3. Software Installation Guide

Figure 1-4. IRIS InSight Icon

Figure 2-1. Indigo2 Parts

Figure 2-2. Opening the Front Cover of the Indigo2 Chassis

Figure 2-3. Removing the Front Bezel From the Indigo2 Chassis

Figure 2-4. Installing the System Disk

Figure 2-5. Installing an Option Drive

Figure 2-6. Replacing the Front Bezel on the Indigo2 Chassis

Figure 2-7. Placing the Monitor on Top of the Indigo2 Workstation

Figure 2-8. Attaching the Workstation Stand to the System

Figure 2-9. Connecting the Monitor Cable to the Indigo2 Chassis

Figure 2-10. Connecting the Keyboard Cable to the Indigo2 Chassis

Figure 2-11. Connecting the Mouse Cable to the Indigo2 Chassis

Figure 2-12. Connecting the Microphone to the Indigo2 Chassis

Figure 2-13. Ethernet AUI Port on the Back of the Indigo2 Chassis

Figure 2-14. Connecting the Standard Ethernet Cable

Figure 2-15. Attaching an Ethernet 10-BASE T Cable to the Indigo2 Chassis

Figure 2-16. Attaching the Power Cable to the Monitor

Figure 2-17. Attaching the Power Cable to the Indigo2 Chassis

Figure 2-18. Turning on the Indigo2 Workstation

Figure 2-19. Running the Power-On Diagnostics Notifier

Figure 2-20. System Startup Notifier

Figure 2-21. System is Coming Up Notifier

Figure 2-22. The Login Screen

Figure 2-23. The EZsetup Screen

Figure 2-24. Desktop Icons

Figure 2-25. CD Player Icon

Figure 2-26. The Minimized Console Window

Figure 2-27. The Toolchest

Figure 2-28. IRIS InSight Icon

Figure 2-29. Opening the Front Cover

Figure 2-30. Pressing and Releasing the Power Switch

Figure 2-31. System Power Off Notifier

Figure 2-32. The Toolchest

Figure 2-33. System Shutdown Caution Message

Figure 2-34. System Shutdown Notifier

Figure 2-35. Okay to Power Off Notifier

Figure 2-36. Starting Up the System Notifier

Figure 2-37. Installing the Lockbar

Figure 2-38. Locking the Indigo2 Workstation

Figure 3-1. Removing the Front Bezel From the Indigo2 Chassis

Figure 3-2. Removing the Top Cover From the Indigo2 Chassis

Figure 3-3. Locating the SIMM Sockets

Figure 3-4. Orienting the SIMM When Facing the Rear of the Chassis

Figure 3-5. Tilting the SIMM up to a Vertical Position

Figure 3-6. Replacing the Top Cover on the Indigo2 Chassis

Figure 3-7. Replacing the Front Bezel on the Indigo2 Chassis

Figure 3-8. System Startup Notifier

Figure 3-9. System is Coming up Notifier

Figure 3-10. Removing the Front Bezel from the Indigo2 Chassis

Figure 3-11. Removing the Top Cover From the Indigo2 Chassis

Figure 3-12. Locating the Memory SIMMs

Figure 3-13. Loosening the Screws on the 5-1/4" Drive Tray

Figure 3-14. Removing the 5-1/4" Drive Tray From the Indigo2 Chassis

Figure 3-15. Removing a SIMM

Figure 3-16. Replacing the 5-1/4" Drive Tray in the Indigo2 Chassis

Figure 3-17. Replacing the Top Cover on the Indigo2 Chassis

Figure 3-18. Replacing the Front Bezel on the Indigo2 Chassis

Figure 4-1. Removing the Front Bezel from the Indigo2 Chassis

Figure 4-2. Removing the Top Cover From the Indigo2 Chassis

Figure 4-3. Locating the EISA Slots

Figure 4-4. Opening the Metal Panel in Front of the EISA Slots

Figure 4-5. Installing the EISA Board

Figure 4-6. Closing the Metal Panel in Front of the EISA Slots

Figure 4-7. Replacing the Top Cover of the Indigo2 Chassis

Figure 4-8. Replacing the Front Bezel on the Indigo2 Chassis

Figure 4-9. Removing the Front Bezel From the Indigo2 Chassis

Figure 4-10. Removing the Top Cover From the Indigo2 Chassis

Figure 4-11. Opening the Metal Panel in Front of the Expansion Slots

Figure 4-12. Removing the EISA Board From the Indigo2 Chassis

Figure 4-13. Replacing the Top Cover on the Indigo2 Chassis

Figure 4-14. Replacing the Front Bezel on the Indigo2 Chassis

Figure 5-1. Removing the Front Bezel From the Indigo2 Chassis

Figure 5-2. Locating the Drive Slots in the Front of the Chassis

Figure 5-3. Installing an Internal Drive

Figure 5-4. Replacing the Top Cover on the Indigo2 Chassis

Figure 5-5. Replacing the Front Bezel on the Indigo2 Chassis

Figure 5-6. Removing the Terminator From the Indigo2 Workstation

Figure 5-7. Removing the Terminator From the Last Device on the Daisy-Chain

Figure 5-8. Connecting an External SCSI Device to the Indigo2 Chassis

Figure 5-9. Daisy-chaining an External SCSI Device to Another External SCSI Device

Figure 5-10. Attaching a Terminator to an External SCSI Device

Figure 5-11. Connecting the Power Cable to an External Device

Figure 5-12. CD-ROM Icon

Figure 5-13. Locating the Serial Ports on the Back of the Indigo2 Chassis

Figure 5-14. Connecting the Serial Cable to the Serial Port on the Indigo2 Workstation

Figure 5-15. Connecting an Audio Device to the Indigo2 Workstation

Figure 7-1. System Shutdown Caution Notifier

Figure 7-2. System Shutdown Notifier

Figure 7-3. Okay to Power Off Notifier

Figure 7-4. Pressing the Reset Button

Figure 7-5. Starting up the System Notifier

Figure 7-6. Confidence Tests Form

Figure 7-7. Audio Confidence Test Form

Figure 7-8. Keyboard Test

Figure 7-9. Pressing the Reset Button

Figure 7-10. System Startup Notifier

Figure 7-11. System Recovery Menu

Figure 7-12. Media Request Notifier

Figure 7-13. Enter Password Prompt

Figure 7-14. Locating the Password Jumper

Figure 7-15. Disabled Password Notifier

Figure 8-1. Removing the Front Cover From the Indigo2 Chassis

Figure 8-2. Removing the Front Bezel From the Indigo2 Chassis

Figure 8-3. Removing the Top Cover From the Indigo2 Chassis

Figure 8-4. Lowering the Metal Panel in Front of the Expansion Slots

Figure 8-5. Removing the Screws From the Metal Extension

Figure 8-6. Pulling the Board Set out of the Chassis

Figure 8-7. Replacing the Graphics Board Set

Figure 8-8. Opening the Metal Panel in Front of the Expansion Slots

Figure 8-9. Removing the Screw From the Metal Extension

Figure 8-10. Orientation of the Wrenches

Figure 8-11. Removing the XL Board From the Chassis

Figure 8-12. Replacing the XL Graphics Board in the Chassis

Figure 8-13. Loosening the Screws on the 5-1/4" Drive Tray

Figure 8-14. Removing the 5-1/4" Drive Tray From the Indigo2 Chassis

Figure 8-15. Removing the R4000 CPU Module

Figure 8-16. Removing the R4400 150 MHz CPU Module

Figure 8-17. Removing the R4400 200 MHz CPU Module

Figure 8-18. Removing the R4600 133 MHz CPU Module

Figure 8-19. Replacing the 5-1/4" Drive Tray

Figure 8-20. Removing the Power Supply Screw

Figure 8-21. Disconnecting the SCSI Cable from the 5-1/4" Drive Tray

Figure 8-22. Removing the 5-1/4" Drive Tray From the Indigo2 Chassis

Figure 8-23. Locating the Three Power Supply Cables

Figure 8-24. Moving the Power Supply Toward the Front of the Chassis

Figure 8-25. Removing the Power Supply From the Indigo2 Chassis

Figure 8-26. Connecting the Power Cable Located Close to the Disk Drives

Figure 8-27. Installing the Power Supply

Figure 8-28. Connecting the Power Cables

Figure 8-29. Loosening the Screws on the 5-1/4" Drive Tray

Figure 8-30. Removing the 5-1/4" Drive Tray

Figure 8-31. Lowering the Metal Panel in Front of the Expansion Slots

Figure 8-32. Removing the Screws From the Graphics Board Set

Figure 8-33. Removing the XZ or Extreme Graphics Board Set

Figure 8-34. Orientation of the Wrenches

Figure 8-35. Removing the XL Graphics Board

Figure 8-36. Removing the EISA Board Backplane From the Indigo2 Chassis

Figure 8-37. Removing the R4400 150 MHz CPU Module From the CPU Baseboard

Figure 8-38. Disconnecting the Cables From the CPU Baseboard

Figure 8-39. Removing the Screws From the Back of the Chassis

Figure 8-40. Installing the CPU Baseboard in the Indigo2 Chassis

Figure 8-41. Installing the R4400 150 MHz CPU Module in the Indigo2 Chassis

Figure 8-42. Installing the EISA Board Backplane in the Indigo2 Chassis

Figure 8-43. Installing the Graphics Board Set in the Indigo2 Chassis

Figure 8-44. Installing the 5-1/4" Drive Tray in the Indigo2 Chassis

Figure 8-45. Replacing the Top Cover on the Indigo2 Chassis

Figure 8-46. Replacing the Front Bezel on the Indigo2 Chassis

Figure 9-1. Basic Parameters of VDT Workstation Adjustment (Adapted From ANSI/HFS 100-1988)

Figure A-1. Serial Port Pinout Assignments

Figure A-2. Serial Port Pinout Assignments

Figure A-3. Parallel Port Pinout Assignments

Figure A-4. Ethernet 10-BASE T Port Pinout Assignments

Figure A-5. Ethernet AUI Port Pinout Assignments

Figure A-6. Keyboard Port Pinout Assignments

Figure A-7. Mouse Port Pinout Assignments

Figure A-8. SCSI Port Pinout Assignments

Figure B-1. Opening the Door on the Front of the Indigo2 Workstation

Figure B-2. Turning on the Indigo2 Workstation

Figure B-3. System Startup Notifier

Figure B-4. Keyboard Layout Form

Indigo2 Workstation Owner's Guide
(document number: 007-9096-050 / published: 1996-07-25)    table of contents  |  additional info  |  download

    Front Matter
    Chapter 1. Introduction
    Chapter 2. Getting Started
    Chapter 3. Installing and Removing Memory
    Chapter 4. Installing and Removing EISA Boards
    Chapter 5. Installing Peripherals
    Chapter 6. Installing Software
    Chapter 7. Troubleshooting
    Chapter 8. Ordering, Removing, and Installing Replacement Parts
    Chapter 9. Safety, Maintenance, and Regulatory Information
    Appendix A. Cable Pinout Assignments
    Appendix B. International Keyboard Support
    Glossary
    Index