Hardware  »  Books  »  Developer  »  
MIPS R10000 Microprocessor User Guide, Version 2.0
(document number: 007-2490-001 / published: 1997-01-30)    table of contents  |  additional info  |  download
find in page

1.7 Implications of R10000 Microarchitecture on Software

Superscalar Instruction Issue

---

The R10000 processor has parallel functional units, allowing up to four instructions to be fetched and up to five instructions to be issued or completed each cycle. An ideal code stream would match the fetch bandwidth of the processor with a mix of independent instructions to keep the functional units as busy as possible.

To create this ideal mix, every cycle the hardware would select one instruction from each of the columns below. (Floating-point divide, floating-point square root, integer multiply and integer divide cannot be started on each cycle.) The processor can look ahead in the code, so the mix should be kept close to the ideal described below.

Data dependencies are detected in hardware, but limit the degree of parallelism that can be achieved. Compilers can intermix instructions from independent code streams.

---

---

---

Copyright 1996, 1997, MIPS Technologies, Inc. -- 09 DEC 96

---

---

Generated with CERN WebMaker

MIPS R10000 Microprocessor User Guide, Version 2.0
(document number: 007-2490-001 / published: 1997-01-30)    table of contents  |  additional info  |  download

home/search | what's new | help