IRIX 6.5  »  Books  »  End-User  »  
OCTANE Hardware Central
(document number: 007-3467-003 / published: 2002-08-02)    table of contents  |  additional info  |  download
find in page

Use this list of information as a quick reference.

• CMN/Model No.: System label, rear and top of workstation
  
  
• CPU: Toolchest > System > System Manager > About This System
  
  
• IP Address: Toolchest > System > System Manager > About This System
  
  
• Manufacturer's Declaration of Conformity: Use your CMN/Model number to find your Declaration of Conformity on the Web at: http://www.sgi.com/Products/compliance/index.html
  
  
• Serial number
  
  
  • Toolchest > System > System Manager > About This System
    
    
  • Serial number label, rear and middle of workstation
    
    
• Memory (DIMMs): Toolchest > System > System Manager > About This System:
  
  
  • Install DIMMs in pairs.
    
    
  • Insert two DIMMs of the same size and type in a bank
    
    
  • SGI DIMMs have color coded labels with a part number in the middle of the label:
    
    
    • the 32 MB DIMM has a yellow label
      
      
    • the 64 MB stacked DIMM has a blue label
      
      
    • the 64 MB DIMM (not stacked) has a green label
      
      
    • the 128 MB DIMM has a brown label
      
      
    • the 256 MB stacked DIMM has a red label
      
      
  • Minimum DIMM capacity is 64 MB in a bank (2 x 32 MB)
    
    
  • Maximum configuration is 512 MB in a bank (2 x 256 MB)
    
    
  • Maximum DIMM capacity in the workstation is two GB (8 x 256 MB)
    
    
• Replacement screws, XIO module standoffs: Use M3 8mm screws to secure blank panels, graphics boards, or single layer option boards to the standoffs on the XIO module.
  
  

OCTANE Hardware Central
(document number: 007-3467-003 / published: 2002-08-02)    table of contents  |  additional info  |  download