|
|
IRIX 6.5 » Books » Administrative »
POWER Onyx and Onyx Deskside Owner's Guide
(document number: 007-1733-070 / published: 1996-03-21)
table of contents | additional info | download
find in page
Appendix A. Hardware SpecificationsThe physical, electrical, environmental, and power specifications for the Onyx deskside graphics workstation chassis are listed in Table A-1.
Onyx specifications for the standard 21-inch monitor are in Table A-2.
Table A-1. Onyx Deskside Graphics Workstation Specifications
Parameter
| Characteristics
|
|---|
Height
| 26 inches (65 cm)
| Width
| 21 inches (54 cm)
| Depth
| 29 inches (74 cm)
| Weight
| 195 lbs (89 kg)—minimum
|
| 300 lbs (136 kg)—in shipping carton
| Airflow Clearance
| Variable; see Table 1-1
| Noise Level
| 60 dB approximate
| Electrical Rating
| 110 VAC or 220–240 VAC
| Frequency
| 47–63 Hz single phase at 110 VAC
|
| 47–63 Hz at 220–240 VAC
| Current
| 16 amps max. at 110 VAC
|
| 13 amps max. at 220–240 VAC
| Power Consumption
| 1500 watts nominal at 110 VAC
|
| 1900 watts nominal at 220–240 VAC (RE2 )
2400 watts nominal at 220–240 VAC (IR)
| Heat Dissipation–110 VAC
| 6500 Btu/hr. max—system chassis
| Heat Dissipation–220-240 VAC
| 8100 Btu/hr. max—system chassis
| AC Receptacle Type
| Nema 5-20P for 110 VAC or Nema 6-20P for
220–240 VAC; IEC 30916A/220V 2P/3W
International
| Operating Temperature
| 5o to 35oC at sea level
| Nonoperating Temperature
| -15o to +65oC at sea level
| Operating Humidity
| 20 to 80% relative, noncondensing
| Nonoperating Humidity
| 10 to 90% relative, noncondensing
|
Table A-2 provides specifications for the 21-inch monitor used with deskside Onyx graphics board sets.
Table A-2. Onyx 21-Inch Monitor Specifications
Parameter
| Characteristics
|
|---|
CRT Type
| 21 inches diagonal (20 vertical),
0.26 mm dot pitch, black matrix, short
persistence phosphors with A/R coating
| Brightness (Luminance)
| >25 FL (85.6 nits) +0/-7 FL maximum (with
anti-reflective (A/R) coating)
| Brightness (color temperature) fixed
selectable settings (center of CRT)
| 9300K+8 MPCD (100 +/- 15 cd per m2)
6500K+8 MPCD (85 +/- 15 cd per m2)
| Video Input Signal
| 0.714 Vp-p, analog
| Sync
| Separate H, V, or composite H/V, TTL level
or sync on green at 0.3 Vp-p
| Resolution
| Up to 1600 x 1200 (1280 x 1024 standard)
| Video Clock Frequency
| 200 MHz (maximum)
| Video Input Impedance
| 75 ohms
| Active Horizontal Display Area
| 395 mm
| Active Vertical Display Area
| 295 mm
| Note: Active display area is changed by the graphics board standard.
|
| Misconvergence
| Less than 0.3 mm
| AC Power Supply
| 100-120 VAC or 200-240 VAC
| Dimensions
| 488 mm wide x 474 mm high x 534 mm deep
(including tilt-and-swivel base)
| Weight
| 33kg (72.6 lbs) [36 kg (79 lbs) Gross]
| Environmental Conditions
| 5 to 35oC, operating
–20 to +60oC, nonoperating
| Operating Humidity
| 10 to 80%, noncondensing
| Nonoperating Humidity
| 10 to 90%, noncondensing
|
POWER Onyx and Onyx Deskside Owner's Guide
(document number: 007-1733-070 / published: 1996-03-21)
table of contents | additional info | download
Front Matter
About This Guide
Chapter 1. Introducing the Onyx Deskside Graphics Workstation
Chapter 2. Touring the Chassis
Chapter 3. Getting Started
Chapter 4. Installing Optional Peripherals
Chapter 5. Having Trouble?
Chapter 6. Safety and Comfort
Appendix A. Hardware Specifications
Appendix B. Maintaining Drives
Appendix C. System Controller Messages
Appendix D. Onyx IO4 PROM, Mezzanine, and Troubleshooting
Appendix E. Onyx VMEbus Implementation
Index
home/search |
what's new |
help
|
|
|
