|
|
IRIX 5.3 » Books » Administrative »
CHALLENGE S Server Owner's Guide
(document number: 007-2314-002 / published: 1995-01-17)
table of contents | additional info | download
find in page
- 10-BASE T Ethernet
- Connecting SCSI Devices to the IOPLUS
- cable pinout assignments
- Ethernet 10-BASE T Port
- 50-pin SCSI connector
- Connecting an External SCSI Device
- 68-pin SCSI connectors
- Connecting SCSI Devices to the IOPLUS
- active terminator
- Installing External SCSI Devices
- Connecting an External SCSI Device
- addresses
- external SCSI devices
- Assigning a SCSI Address to the External Device
- addresses, for external devices
- Assigning a SCSI Address to the External Device
- adjusting
- work surface area
- Adjusting Your Chair, Work Surface, and Workstation
- your monitor height
- Adjusting Your Chair, Work Surface, and Workstation
- adjusting, chair height
- Adjusting Your Chair, Work Surface, and Workstation
- air flow
- air outlet
- Power Supply
- amperage
- draw
- Power Supply
- power supply output
- Power Supply
- apropos command
- Online Reference (Manual) Pages
- ASICS
- custom use of
- Custom ASICs
- DMUX1
- Custom ASICs
- Memory Subsystem
- HPC3
- Custom ASICs
- IOC1 ASIC
- Custom ASICs
- MC1
- Custom ASICs
- Memory Subsystem
- assembling the server
- Assembling the Server and Attaching the Console
- attaching
- system console
- Assembling the Server and Attaching the Console
- back panel connectors
- Locations and Functions of Back-Panel Connectors
- backups
- Recovering from a System Crash
- Recovering from a System Crash
- Software Do's and Don'ts
- boards
- checking the installation
- Checking the GIO Option Board Installation
- installing GIO option
- Installing GIO Option Boards
- installing network
- Installing GIO Option Boards
- installing video
- Installing GIO Option Boards
- buses
- CPU bus
- CPU Bus
- description of system buses
- System Buses and I/O Channels
- P-bus
- Custom ASICs
- speed of data transfer
- CPU Bus
- cable pinout assignments
- Cable Pinout Assignments
- for serial ports
- Serial Ports
- for the 50-pin SCSI port
- 50-pin SCSI Port
- for the 68-pin SCSI port
- 68-pin SCSI Port
- for the Ethernet 10-BASE T port
- ISDN Port
- Ethernet 10-BASE T Port
- for the Ethernet AUI port
- Ethernet AUI Port
- for the ISDN port
- ISDN Port
- for the parallel port
- Parallel Port
- cables
- connecting power to an external device
- Connecting an External SCSI Device
- Ethernet 10-BASE T
- Connecting an Ethernet 10-BASE T Cable (S-100 and S-150 Servers)
- Ethernet AUI
- Connecting an Ethernet AUI Cable
- external SCSI
- Connecting an External SCSI Device
- Connecting an External SCSI Device
- full-handshake
- Modem Cable
- ISDN
- Connecting an Integrated Services Digital Network (ISDN) Cable
- maximum length for external SCSI
- Connecting an External SCSI Device
- modem cables
- Modem Cable
- serial adapter cable
- Serial Devices Using a Silicon Graphics Adapter Cable
- serial cables
- Serial Device Connection Overview
- serial device power cables
- Serial Device Connection Overview
- used with printers
- Printer/Character (ASCII) Terminal Serial Cable
- used with terminals
- Printer/Character (ASCII) Terminal Serial Cable
- using shielded
- Shielded Cables
- cache sizes
- Overview
- CD included with system
- About the CD Software Media
- CD-ROM drive
- problems with
- External SCSI Device Not Working
- Challenge S-100
- Overview
- Challenge S-150
- Overview
- CHALLENGEvault M
- Connecting SCSI Devices to the IOPLUS
- chassis
- available models
- Overview
- back panel connectors
- Overview of the System Connectors and Ports
- cooling fan location
- Power Supply
- disconnecting power
- Safety Considerations
- drive bracket support of
- Internal Drive Options
- external views
- Overview
- front panel controls
- Front-Panel Controls
- ideal surface on which to place
- Safety Considerations
- power button
- Front-Panel Controls
- power supply
- Power Supply
- reset button
- Front-Panel Controls
- tour of
- Chassis Tour and Theory of Operation
- volume control
- Front-Panel Controls
- checking
- new memory SIMMs
- Checking the New Memory
- clock
- speed of
- CPU Bus
- command monitor
- entering
- Testing the Internal Drive
- Command Monitor prompt
- If You Installed Additional Hard Disks
- commands
- apropos
- Online Reference (Manual) Pages
- cpio
- Formatting a Floptical Diskette
- fpck
- Formatting a Floptical Diskette
- fx
- Formatting a Floptical Diskette
- hinv
- Testing the Internal Drive
- man
- Online Reference (Manual) Pages
- mkfp
- Formatting a Floptical Diskette
- mount
- Formatting a Floptical Diskette
- msdosd
- Formatting a Floptical Diskette
- smfd
- Formatting a Floptical Diskette
- tar
- Formatting a Floptical Diskette
- configurations
- overview of
- Overview
- configure additional drives
- If You Installed Additional Hard Disks
- connecting
- external SCSI devices
- Installing External SCSI Devices
- serial devices
- Serial Device Connection Overview
- connectors
- correspondence to software
- Correspondence of Connectors to IRIX Special Device Files
- description of back panel
- Locations and Functions of Back-Panel Connectors
- locations of external
- Locations and Functions of Back-Panel Connectors
- overview
- Overview of the System Connectors and Ports
- console
- attaching
- Assembling the Server and Attaching the Console
- console terminal
- Serial Device Connection Overview
- conventions
- Conventions
- cooling fan
- location of
- Power Supply
- cover
- locking the
- Locking the Top Cover
- removing the
- Removing the Top Cover
- replacing the
- Replacing the Top Cover
- cpio command
- Formatting a Floptical Diskette
- CPU
- cache sizes
- Overview
- clock speed of
- Overview
- instruction set supported
- CPU Superpipelining
- instructions per cycle
- CPU Superpipelining
- speed to bus
- CPU Bus
- superpipelining in
- CPU Superpipelining
- types
- Overview
- width of data paths
- CPU Superpipelining
- CPU board
- error messages regarding
- Solid Red LED With an Error Message
- CPU module
- System Boards
- connection to Memory Subsystem
- CPU Module
- description of
- CPU Module
- replaceable separate from system board
- CPU Module
- replacing
- Replacing the CPU module
- secondary cache on
- CPU Module
- current
- draw
- Power Supply
- daisy chaining SCSI devices
- Installing External SCSI Devices
- daisy-chaining SCSI devices
- Connecting an External SCSI Device
- data paths
- width of
- CPU Superpipelining
- devices
- maximum number on SCSI contoller 0
- Installing External SCSI Devices
- diagnosing
- hardware problems
- Diagnosing Hardware Problems
- diagnostic tests
- Interactive Diagnostic Environment (IDE) Tests
- power-on
- Powering On the System
- Powering On the System
- Power-On Tests
- differential hard disk drives
- Connecting SCSI Devices to the IOPLUS
- differential peripheral systems
- Connecting SCSI Devices to the IOPLUS
- differential SCSI connectors
- Connecting an External SCSI Device
- Digital Linear Tape (stacker)
- Connecting SCSI Devices to the IOPLUS
- direct memory access (DMA)
- GIO slot dependencies
- GIO32-bis Expansion Subsystem
- use of
- Memory Subsystem
- use with GIO
- Custom ASICs
- disabling system maintenance password
- Disabling the System Maintenance Password
- disk drive
- installing
- Installing an Internal Floptical Drive or Second Hard Disk
- diskette
- ejecting from the floptical drive
- Ejecting a Floptical Diskette
- disks
- installing an internal drive
- Installing an Internal Floptical Drive or Second Hard Disk
- dks man page
- Correspondence of Connectors to IRIX Special Device Files
- DMUX1 ASIC
- Custom ASICs
- Memory Subsystem
- documentation
- available
- Finding the Information You Need
- conventions
- Conventions
- InSight
- Optional Documentation
- IRIS Software Installation Guide
- Optional Documentation
- IRIX Advanced Site and Server Administration Guide
- Optional Documentation
- on-line versions
- Optional Documentation
- documentation, optional
- Optional Documentation
- drive addresses
- Assigning a SCSI Address to the External Device
- drive bracket
- removing
- Installing the Drive
- drive brackets
- use as chassis support
- Internal Drive Options
- drives
- locations of internal
- Internal Drive Options
- releasing drive bracket
- Internal Drive Options
- system disk
- Internal Drive Options
- use of floptical
- Internal Drive Options
- dumb terminal serial cable
- Printer/Character (ASCII) Terminal Serial Cable
- electromagnetic emissions
- Electromagnetic Emissions device may not cause harmful interference
- electrostatic discharge (ESD)
- Safety Considerations
- error messages
- for CPU module
- Solid Red LED With an Error Message
- for memory SIMMs
- Blinking Red LED With an Error Message
- Etherent
- 10-BASE T connector
- Connecting SCSI Devices to the IOPLUS
- Ethernet
- attaching to Ethernet 10-BASE T
- Connecting an Ethernet 10-BASE T Cable (S-100 and S-150 Servers)
- attaching to Ethernet AUI
- Connecting an Ethernet AUI Cable
- Ethernet 10-BASE T
- IOPLUS
- cable pinout assignments
- Ethernet 10-BASE T Port
- connecting
- Connecting an Ethernet 10-BASE T Cable (S-100 and S-150 Servers)
- Ethernet AUI
- cable pinout assignments
- Ethernet AUI Port
- connecting the cable
- Connecting an Ethernet AUI Cable
- Ethernet ports
- Overview of the System Connectors and Ports
- location of
- Locations and Functions of Back-Panel Connectors
- external devices
- installing
- Installing External SCSI Devices
- problems with
- External SCSI Device Not Working
- SCSI addresses
- Assigning a SCSI Address to the External Device
- testing a SCSI device
- Testing the External SCSI Device
- external differential SCSI devices
- Connecting SCSI Devices to the IOPLUS
- external SCSI devices
- replacing
- Replacing External SCSI Devices
- file system
- increasing (growing) size of
- If You Installed Additional Hard Disks
- floating-point unit (FPU)
- CPU Module
- floptical
- commands used with
- Formatting a Floptical Diskette
- device names
- Using the Floptical for Backup
- ejecting a diskette
- Ejecting a Floptical Diskette
- formatting
- Formatting a Floptical Diskette
- installation of
- Internal Drive Options
- installing
- Installing an Internal Floptical Drive or Second Hard Disk
- manually ejecting a diskette
- Ejecting a Floptical Diskette
- mounting under IRIX
- Formatting a Floptical Diskette
- time requred to format
- Formatting a Floptical Diskette
- types of media used with
- Formatting a Floptical Diskette
- using
- Using the Floptical for Backup
- using as an IRIX file system
- Formatting a Floptical Diskette
- using SoftPC/AT with
- Formatting a Floptical Diskette
- using with MS-DOS and Macintosh
- Formatting a Floptical Diskette
- floptical drive
- jumper settings
- Floptical Drive Jumper Settings
- problems with
- Internal Floptical Drive or Second Hard Disk Drive Not Working
- replacing
- Replacing the Internal Floptical Drive or Second Hard Disk Drive
- setting SCSI address on
- Floptical Drive Jumper Settings
- format command
- Formatting a Floptical Diskette
- formatting
- floptical diskette
- Formatting a Floptical Diskette
- fpck command
- Formatting a Floptical Diskette
- front panel controls
- Front-Panel Controls
- About the Controls on the Front Panel
- power button
- About the Controls on the Front Panel
- Front-Panel Controls
- reset button
- Front-Panel Controls
- About the Controls on the Front Panel
- volume buttons
- Front-Panel Controls
- About the Controls on the Front Panel
- full-handshake cables
- Modem Cable
- fx command
- Formatting a Floptical Diskette
- GIO board
- checking installtion of
- Checking the GIO Option Board Installation
- GIO boards
- possible options
- IOPLUS
- GIO expansion ports
- location of
- Locations and Functions of Back-Panel Connectors
- GIO extender
- System Boards
- GIO option board
- checking the installation
- Checking the GIO Option Board Installation
- installing
- Installing GIO Option Boards
- GIO option boards
- replacing
- Replacing a GIO Option Board
- GIO slot dependencies
- GIO Slot Dependencies
- GIO slots
- identifying
- Installing a GIO Option Board
- removing faceplate from
- Installing a GIO Option Board
- GIO64 bus arbiter
- MC1 ASIC
- Custom ASICs
- grounding strap
- Installing the Drive
- guidelines, Visual Display Terminal
- ANSI Standard for Visual Display Terminal Workstations
- hard disk drive
- removing second internal
- Replacing the Internal Floptical Drive or Second Hard Disk Drive
- hard disks
- configuring
- If You Installed Additional Hard Disks
- file systems
- If You Installed Additional Hard Disks
- formatting with the fx command
- If You Installed Additional Hard Disks
- multiple partitions
- If You Installed Additional Hard Disks
- using additional drives
- If You Installed Additional Hard Disks
- hardware
- maintenance of
- Hardware Do's and Don'ts
- zzz
- Software Do's and Don'ts
- hardware inventory command (hinv)
- Assigning a SCSI Address to the External Device
- hinv command
- example listing
- Testing the Internal Drive
- Assigning a SCSI Address to the External Device
- HPC3 ASIC
- Custom ASICs
- I/O channels
- Overview
- IDE (Interactive Diagnostic Environment) tests
- Interactive Diagnostic Environment (IDE) Tests
- information
- locating
- Finding the Information You Need
- InSight
- Optional Documentation
- install serial devices
- Installing the System Console and Other Serial Devices
- installation tape
- Recovering from a System Crash
- installing
- CD-ROM drive
- Installing External SCSI Devices
- DAT drive
- Installing External SCSI Devices
- disk drive
- Installing an Internal Floptical Drive or Second Hard Disk
- Ethernet 10-BASE T cable
- Connecting an Ethernet 10-BASE T Cable (S-100 and S-150 Servers)
- Ethernet AUI cable
- Connecting an Ethernet AUI Cable
- external devices
- Installing Internal and External Peripherals
- Installing External SCSI Devices
- floptical
- Installing an Internal Floptical Drive or Second Hard Disk
- floptical drive
- Installing an Internal Floptical Drive or Second Hard Disk
- GIO option boards
- Installing GIO Option Boards
- internal drives
- Installing Internal and External Peripherals
- internal SCSI cable
- Installing the Drive
- ISDN cable
- Connecting an Integrated Services Digital Network (ISDN) Cable
- network boards
- Installing GIO Option Boards
- network cable
- Connecting Network Cables
- new version of operating system
- Installing a New Version of the Operating System Software
- optional software
- Installing Optional Software
- power cable on second drive
- Installing the Drive
- SCSI controller boards
- Installing GIO Option Boards
- serial devices
- Installing the System Console and Other Serial Devices
- Serial Device Connection Overview
- software
- Installing and Removing Software
- software, after system crash
- Recovering from a System Crash
- tape drive
- Installing External SCSI Devices
- video boards
- Installing GIO Option Boards
- instructions per cycle
- CPU Superpipelining
- interference to radios and televisions
- Radio and Television Interference
- internal drive
- problems with
- Internal Floptical Drive or Second Hard Disk Drive Not Working
- testing
- Testing the Internal Drive
- interrupts
- control of through IOC1 ASIC
- Custom ASICs
- IOC1 ASIC
- Custom ASICs
- IOPLUS
- connecting devices to
- Connecting SCSI Devices to the IOPLUS
- description of
- IOPLUS
- SCSI and Ethernet capabilities of
- Connecting SCSI Devices to the IOPLUS
- IOPLUS board
- System Boards
- IRIS Software Installation Guide
- Optional Documentation
- IRIX Advanced Site and Server Administration Guide
- Optional Documentation
- IRIX device files
- correspondence to ports
- Correspondence of Connectors to IRIX Special Device Files
- ISDN
- connecting
- Connecting an Integrated Services Digital Network (ISDN) Cable
- connecting cable
- Connecting an Integrated Services Digital Network (ISDN) Cable
- note on using
- Locations and Functions of Back-Panel Connectors
- ISDN port
- cable pinout assignments
- ISDN Port
- location of
- Locations and Functions of Back-Panel Connectors
- jumper settings
- floptical drive
- Floptical Drive Jumper Settings
- LED light colors
- Power-On Tests
- limited user warranty
- Limited User Warranty
- locking the top cover
- Locking the Top Cover
- login account
- setting up
- Setting Up Login Accounts
- Macintosh
- formatting a floptical disk for use with
- Formatting a Floptical Diskette
- maintenance
- Maintaining Your Hardware and Software
- man command
- Online Reference (Manual) Pages
- man pages
- Online Reference (Manual) Pages
- MC1 ASIC
- Custom ASICs
- Memory Subsystem
- memory
- Overview
- error messages for
- Blinking Red LED With an Error Message
- memory interleaving
- performed by DMUX1 ASIC
- Custom ASICs
- memory SIMMs
- checking after installation
- Checking the New Memory
- installing
- Installing Memory
- replacing
- Replacing SIMMs
- memory subsystem
- description of
- Memory Subsystem
- minimizing screen glare
- Adjusting Your Chair, Work Surface, and Workstation
- mkfp commands
- Formatting a Floptical Diskette
- modem
- connection of
- Connecting a Modem
- modem serial cable
- Printer/Character (ASCII) Terminal Serial Cable
- modems
- Installing the System Console and Other Serial Devices
- cables used with
- Modem Cable
- mount command
- Formatting a Floptical Diskette
- MS-DOS
- formatting a floptical for use with
- Formatting a Floptical Diskette
- msdosd command
- Formatting a Floptical Diskette
- network
- attaching the system to
- Connecting Network Cables
- network interface
- connecting Ethernet 10-BASE T
- Connecting an Ethernet 10-BASE T Cable (S-100 and S-150 Servers)
- connecting Ethernet AUI
- Connecting an Ethernet AUI Cable
- connecting ISDN
- Connecting an Integrated Services Digital Network (ISDN) Cable
- Ethernet 10-BASE T
- Connecting Network Cables
- Ethernet AUI
- Connecting Network Cables
- primary (AUI)
- System Board
- secondary (10-BASE T)
- IOPLUS
- supported types of
- Connecting Network Cables
- on-line reference (man) pages
- Online Reference (Manual) Pages
- on/off button
- About the Controls on the Front Panel
- operating system
- installing new version of
- Installing a New Version of the Operating System Software
- option board
- checking installation of
- Checking the GIO Option Board Installation
- option boards
- checking the installation
- Checking the GIO Option Board Installation
- GIO slot dependencies
- GIO Slot Dependencies
- installing
- Installing GIO Option Boards
- installing GIO options
- Installing GIO Option Boards
- option disk
- Internal Drive Options
- optional software
- installing
- Installing Optional Software
- removing
- Removing Optional Software
- orange LED
- Powering On the System
- Powering On the System
- oscillator
- speed of
- CPU Bus
- override
- Serial Device Connection Overview
- parallel port
- cable pinout assignments
- Parallel Port
- location of
- Locations and Functions of Back-Panel Connectors
- software device files
- Correspondence of Connectors to IRIX Special Device Files
- part numbers
- system components
- Ordering a Replacement Part
- parts
- replacement
- Ordering a Replacement Part
- Ordering, Removing, and Installing Replacement Parts
- password
- disabling PROM
- Disabling the System Maintenance Password
- PC adapter cable for serial devices
- Serial Devices Using a PC Adapter Cable
- peripherals
- serial devices
- Installing the System Console and Other Serial Devices
- plp man page
- Correspondence of Connectors to IRIX Special Device Files
- power button
- About the Controls on the Front Panel
- Front-Panel Controls
- power cable
- connecting to second drive
- Installing the Drive
- power cables
- for serial devices
- Serial Device Connection Overview
- power supply
- disconnecting
- Safety Considerations
- features and specifications
- Power Supply
- replacing
- Replacing the Power Supply
- turning off immediately
- About the Controls on the Front Panel
- power-on tests
- Powering On the System
- Power-On Tests
- powering on the server
- Starting the Server for the First Time
- printer serial cable
- Printer/Character (ASCII) Terminal Serial Cable
- printer, problems with
- Printer Problems
- printers
- serial cables used with
- Printer/Character (ASCII) Terminal Serial Cable
- problem
- blinking red light
- Blinking Red LED With an Error Message
- Blinking Red LED with No Error Message
- no light on front of system
- No Visible Light From the LED With No Error Message
- no power to system
- No Power to the System
- solid red light
- Solid Red LED With No Error Message
- with floptical drive
- Internal Floptical Drive or Second Hard Disk Drive Not Working
- with internal drive
- Internal Floptical Drive or Second Hard Disk Drive Not Working
- with printer
- Printer Problems
- with software installation
- Troubleshooting Software Installation
- problem with
- external SCSI device
- External SCSI Device Not Working
- problems
- common hardware
- Common Problems
- problems, diagnosing
- Diagnosing Hardware Problems
- PROM password, disabling
- Disabling the System Maintenance Password
- R4400/R4600
- use on CPU module
- CPU Module
- radio interference
- Radio and Television Interference
- recognition of a new drive
- Testing the Internal Drive
- recovery from system crashes
- Recovering from a System Crash
- red LED light
- Powering On the System
- red light
- Solid Red LED With No Error Message
- blinking
- Power-On Tests
- solid
- Power-On Tests
- regulatory declarations
- Manufacturer's Regulatory Declarations
- removing
- drive bracket
- Installing the Drive
- GIO option boards
- Replacing a GIO Option Board
- memory SIMMs
- Replacing SIMMs
- optional software
- Removing Optional Software
- second internal second hard disk
- Replacing the Internal Floptical Drive or Second Hard Disk Drive
- software
- Installing and Removing Software
- the CPU module
- Replacing the CPU module
- the floptical drive
- Replacing the Internal Floptical Drive or Second Hard Disk Drive
- the power supply
- Replacing the Power Supply
- the system disk drive
- Replacing the System Drive
- removing the top cover
- Removing the Top Cover
- replacement parts
- Ordering, Removing, and Installing Replacement Parts
- Ordering a Replacement Part
- replacing
- external SCSI devices
- Replacing External SCSI Devices
- GIO option boards
- Replacing a GIO Option Board
- internal parts
- Replacing Internal Parts
- memory SIMMs
- Replacing SIMMs
- screws
- Miscellaneous Parts (Screws and Standoffs)
- second internal hard disk
- Replacing the Internal Floptical Drive or Second Hard Disk Drive
- the CPU module
- Replacing the CPU module
- the floptical drive
- Replacing the Internal Floptical Drive or Second Hard Disk Drive
- the power supply
- Replacing the Power Supply
- the server
- Replacing the System
- the system disk drive
- Replacing the System Drive
- the top cover
- Replacing the Top Cover
- tools required
- Tools Required to Remove and Replace Components
- reserved SCSI ID numbers
- Assigning a SCSI Address to the External Device
- reset button
- About the Controls on the Front Panel
- Front-Panel Controls
- Recovering from a System Crash
- hardware reset
- About the Controls on the Front Panel
- RS-232
- see serial cable
- Assembling the Server and Attaching the Console
- see serial port
- Assembling the Server and Attaching the Console
- safety
- Safety, Maintenance, and Regulatory Information
- safety considerations
- setting up the system
- Safety Considerations
- screens:See also monitors
- Software Do's and Don'ts
- screwdrivers
- recommended types
- Tools Required to Remove and Replace Components
- screws
- sizes used in chassis
- Miscellaneous Parts (Screws and Standoffs)
- SCSI
- 50-pin single-ended connector
- Connecting an External SCSI Device
- 68-pin differential connectors
- Connecting SCSI Devices to the IOPLUS
- CHALLENGEvault M
- Connecting SCSI Devices to the IOPLUS
- choosing unit addresses
- Installing External SCSI Devices
- combined cable length issues
- Connecting an External SCSI Device
- connecting a terminator
- Connecting an External SCSI Device
- connecting an external device
- Connecting an External SCSI Device
- expansion chassis
- Connecting SCSI Devices to the IOPLUS
- internal controller number
- Assigning a SCSI Address to the External Device
- maximum cable length on controller 0
- Installing External SCSI Devices
- reserved addresses
- Assigning a SCSI Address to the External Device
- reserved ID numbers
- Assigning a SCSI Address to the External Device
- setting external device addresses
- Setting the SCSI Address on an External Device
- terminator requirements
- Installing External SCSI Devices
- SCSI address 0
- Assigning a SCSI Address to the External Device
- SCSI addresses
- external devices
- Assigning a SCSI Address to the External Device
- SCSI cable
- available cable types and lengths
- Connecting an External SCSI Device
- installing on an internal drive
- Installing the Drive
- SCSI controllers
- number of devices on internal
- Internal Drive Options
- SCSI devices
- connecting an external
- Connecting an External SCSI Device
- differential
- Connecting an External SCSI Device
- maximum number on controller 0
- Installing External SCSI Devices
- maximum number on controllers 4 and 5
- IOPLUS
- problems with external
- External SCSI Device Not Working
- single-ended
- Connecting an External SCSI Device
- SCSI port
- cable pinout assignments for 50-pin
- 50-pin SCSI Port
- cable pinout assignments for 68-pin
- 68-pin SCSI Port
- SCSI ports
- 50-pin
- Correspondence of Connectors to IRIX Special Device Files
- 68-pin
- Correspondence of Connectors to IRIX Special Device Files
- differential
- IOPLUS
- location of
- Locations and Functions of Back-Panel Connectors
- software device files
- Correspondence of Connectors to IRIX Special Device Files
- speed of external
- IOPLUS
- second internal drive
- Installing an Internal Floptical Drive or Second Hard Disk
- serial adapter cable
- Serial Devices Using a Silicon Graphics Adapter Cable
- serial cable
- attaching the system console
- Assembling the Server and Attaching the Console
- description of system cable
- Assembling the Server and Attaching the Console
- for modem
- Modem Cable
- printer/modem/dumb terminal
- Printer/Character (ASCII) Terminal Serial Cable
- serial cables
- Serial Device Connection Overview
- Serial Cables
- serial connectors
- Serial Device Connection Overview
- serial devices
- installing
- Installing the System Console and Other Serial Devices
- PC adapter cable for
- Serial Devices Using a PC Adapter Cable
- Silicon Graphics serial adapter cable for
- Serial Devices Using a Silicon Graphics Adapter Cable
- serial man page
- Correspondence of Connectors to IRIX Special Device Files
- serial port
- software device files
- Correspondence of Connectors to IRIX Special Device Files
- serial ports
- Overview of the System Connectors and Ports
- Serial Device Connection Overview
- cable pinout assignments
- Serial Ports
- commands and configuration
- Helpful Serial Port Commands
- DUARTs
- System Board
- location of
- Locations and Functions of Back-Panel Connectors
- server
- assembling
- Assembling the Server and Attaching the Console
- replacing entire chassis
- Replacing the System
- turning on
- Starting the Server for the First Time
- server configurations
- Overview
- service information
- Service and Support Information
- setting up the system
- Getting Started
- shielded cables
- Shielded Cables
- Silicon Graphics
- replacement parts from
- Ordering, Removing, and Installing Replacement Parts
- Ordering a Replacement Part
- service and support from
- Service and Support Information
- Silicon Graphics adapter cable
- Serial Devices Using a Silicon Graphics Adapter Cable
- SIMMs
- checking after installation
- Checking the New Memory
- error messages
- Blinking Red LED With an Error Message
- installing
- Installing Memory
- replacing
- Replacing SIMMs
- single-ended SCSI devices
- caution
- Connecting SCSI Devices to the IOPLUS
- single-user mode
- entering
- If You Installed Additional Hard Disks
- size of screws and standoffs
- Miscellaneous Parts (Screws and Standoffs)
- smfd command
- Formatting a Floptical Diskette
- SoftPC/AT
- using floptical with
- Formatting a Floptical Diskette
- software
- installing and removing
- Installing and Removing Software
- installing new version of operating system
- Installing a New Version of the Operating System Software
- installing optional
- Installing Optional Software
- maintenance of
- Software Do's and Don'ts
- possible subsystems to remove
- Removing Optional Software
- removing optional
- Removing Optional Software
- system crashes resulting from problems with
- Recovering from a System Crash
- software installation
- problems with
- Troubleshooting Software Installation
- troubleshooting
- Troubleshooting Software Installation
- stacker
- Digital Linear Tape
- Connecting SCSI Devices to the IOPLUS
- standoffs
- sizes used in chassis
- Miscellaneous Parts (Screws and Standoffs)
- subsystems
- possible subsystems to remove
- Removing Optional Software
- superpipelining
- CPU Superpipelining
- support information
- Service and Support Information
- swap space
- increasing
- If You Installed Additional Hard Disks
- symptoms, hardware problems
- Power-On Tests
- system
- replacing entire
- Replacing the System
- resetting with the reset button
- About the Controls on the Front Panel
- safety considerations
- Safety Considerations
- setting up
- Getting Started
- turning off power immediately
- About the Controls on the Front Panel
- turning on and off
- About the Controls on the Front Panel
- system board
- System Boards
- description of
- System Board
- system boards
- location of optional
- System Boards
- standard boards
- System Boards
- system buses
- description of
- System Buses and I/O Channels
- P-bus
- Custom ASICs
- system crashes, recovery from
- Recovering from a System Crash
- system disk
- Internal Drive Options
- system disk drive
- replacing
- Replacing the System Drive
- system drive bracket
- Installing the Drive
- system maintenance menu
- Testing the Internal Drive
- system maintenance password
- disabling
- Disabling the System Maintenance Password
- System Manager
- checking new memory SIMMs
- Checking the New Memory
- systems
- service and support information for
- Service and Support Information
- tape drives
- problems with
- External SCSI Device Not Working
- system crash recovery from
- Recovering from a System Crash
- tape option
- Digital Linear Tape (stacker)
- Connecting SCSI Devices to the IOPLUS
- tar command
- Formatting a Floptical Diskette
- television interference
- Radio and Television Interference
- terminal
- attaching system console
- Assembling the Server and Attaching the Console
- cables for
- Printer/Character (ASCII) Terminal Serial Cable
- terminals
- determining types supported
- Supported Terminals
- terminator, SCSI
- Connecting an External SCSI Device
- terminfo database
- Supported Terminals
- testing an internal drive
- Testing the Internal Drive
- Testing the Internal Drive
- theory of operation
- Chassis Tour and Theory of Operation
- tools required to work on server
- Tools Required to Remove and Replace Components
- top cover
- locking the
- Locking the Top Cover
- removing the
- Removing the Top Cover
- replacing the
- Replacing the Top Cover
- tps man page
- Correspondence of Connectors to IRIX Special Device Files
- troubleshooting
- blinking red light
- Blinking Red LED With an Error Message
- Blinking Red LED with No Error Message
- diagnostic tests
- Interactive Diagnostic Environment (IDE) Tests
- external SCSI device
- External SCSI Device Not Working
- floptical drive
- Internal Floptical Drive or Second Hard Disk Drive Not Working
- IDE tests
- Interactive Diagnostic Environment (IDE) Tests
- internal drive
- Internal Floptical Drive or Second Hard Disk Drive Not Working
- no light on front of system
- No Visible Light From the LED With No Error Message
- no power
- No Power to the System
- printer problems
- Printer Problems
- recovery from system crashes
- Recovering from a System Crash
- replacement parts for
- Ordering, Removing, and Installing Replacement Parts
- replacing the GIO option boards
- Replacing a GIO Option Board
- service and support for
- Service and Support Information
- software installation
- Troubleshooting Software Installation
- solid red light
- Solid Red LED With No Error Message
- table of symptoms
- Power-On Tests
- turning on the server
- Starting the Server for the First Time
- Visual Display Terminal (VDT) guidelines
- ANSI Standard for Visual Display Terminal Workstations
- voltage
- acceptable ranges
- Power Supply
- volume control
- Front-Panel Controls
- volume controls
- About the Controls on the Front Panel
- warranty
- Limited User Warranty
- watts
- power supply output
- Power Supply
- work surface, selecting your
- Facilities Selection
- workstations
- radio and television interference caused by
- Radio and Television Interference
- wrist strap
- Installing the Drive
CHALLENGE S Server Owner's Guide
(document number: 007-2314-002 / published: 1995-01-17)
table of contents | additional info | download
Front Matter
Chapter 1. Introduction
Chapter 2. Chassis Tour and Theory of Operation
Chapter 3. Getting Started
Chapter 4. Installing Memory
Chapter 5. Installing GIO Option Boards
Chapter 6. Installing Internal and External Peripherals
Chapter 7. Installing and Removing Software
Chapter 8. Troubleshooting
Chapter 9. Ordering, Removing, and Installing Replacement Parts
Chapter 10. Safety, Maintenance, and Regulatory Information
Appendix A. Cable Pinout Assignments
Appendix B. Serial Cables
Appendix C. Floptical Drive Jumper Settings
Appendix D. Supported Terminals
Glossary
Index
home/search |
what's new |
help
|
|
|
